pyonchi Posted April 8, 2016 Report Posted April 8, 2016 !!! These collars are NOT meant for BDSM or any kind of play / rough scene ; they are simply day collars !!!!!! They are accessories: they can break very easily and won't make it through tugging in one piece !!! I recently got into crafting cute satin collars ! They're mostly used for kitten play, but I wear them in Little Space too~ they're just too adorable ! > v < I just thought I'd share the process with you all; if you can't understand a part in particular, don't hesitate to ask ! = v = ) / http://i.imgur.com/lwItHc2.pnghttp://i.imgur.com/gIFwqfQ.pngI made a few collars and used different techniques for each of them: those instructions were followed while I made this collar ! (The pictures are a VERY big help, I'd strongly recommend looking at them if you get stuck ! Especially for the d-rings part ! )http://i.imgur.com/yywbmD5.png What I used : Satin ribbon (that large simple back ribbon) Grosgrain ribbon (the thinner ribbon with characters on it) 3x D-rings ("D" thick shaped rings, often used for BDSM products) Thread Measuring tape 3x Jumprings Regular needle Ambroidery Needle Hot glue (optional) Lace (optional) Charms, Bells, etc... (optional) x1 Cabochon to decorate the bow Steps (without pictures, sorry :c ) : Measure the diameter of your neck & remove 5 centimeters (so you can attach the D-rings and get a nice fit) ! Carefully cut your ribbons and lace following the previous measurements ! Get the thread and needle ready ; double your thread using this method (It'll make the collar steadier) ! For a pleated collar, use this method (you can do it without the rectangular thingy, but it might end up looking very messy) ! ♥ Don't forget to leave some ribbon space to fold back around the D-rings ! Leave two ~3CM long non-pleated areas at both end of your collar. Cut the sides of the areas so you can neatly fit a D-ring around them and fold both (grosgrain on top of the satin one, see steps #6 to #8) ribbons around it ! ♥ Use veeery thin, 2CM wide spreads of hot glue to glue your lace onto the satin ribbon (too much glue might make the collar uncomfortable to wear) ! Grab one end of your grosgrain ribbon, and lightly hot-glue it onto the end of your satin ribbon ! Lightly hot-glue the middle + other end of the grosgrain ribbon onto the satin one (again, it'll make the collar steadier) ! Double your thread if you need to, and start sewing both sides of your ribbon onto the large one. Have patience ! Take a piece of satin ribbon you haven't used yet, and cut it so it is 4CM long and large enough for you to fit a D-ring around ! Use this method to sew the ring onto the piece you've just cut (instead of one side of the ribbon being longer than the other, make them equal) ! After you've sewn the bottom of the ribbon around the D-ring, put a tiny bit of hot glue in between the two loose ribbon pieces ! Sew the top of the fabric holding the D-ring onto the middle of the collar (be sure to measure and stuff before) ! ♥ You can either order pre-made bows on eBay or Etsy, or make your own ; if you don't have any bows laying around, here's how I learned to make my own ! ♥ Glue your either pre-made or handmade bow onto the middle of your collar : be sure to hide the top of the D-ring holding ribbon ! Using this kind of blurry technique, get one of the ends of your collar (the flat part with trimmed sides) and insert a D-ring around it. Slide the D-ring further until it reaches the pleated (and larger, if you followed the steps right) area ! Fold the trimmed ribbon nicely around the ring. Hot-glue it onto the inner part of the collar, and finally, sew the sides of the ribbon if you're looking for a steadier result ! ♥ Make sure the D-ring doesn't touch the hot glue : the collar might not be as comfortable as it could be if the rings aren't able to rotate smoothly around the curves of your neck ! ♥ Connect three jump rings together, then connect an extremity to the D-ring under the bow (middle of the collar) ! Attach the bell / charm of your choice ! Be patient for this part, especially if you don't own any pliers (just like me n v n ~ ) ! Repeat as many times as you'd like, be creative and personalize it as you wish ! ♥ ♥ ♥ Cut a piece of the same satin ribbon you used before to tie the collar around your neck : make it pretty long ! Wear and love your very own kitten / little collar ! ♥ 17
Eris Posted April 13, 2016 Report Posted April 13, 2016 I don't read it yet but thank you very much I searched everywere for such a tutorial. They are soo sweet. =) 1
xDisturbedWolfx Posted April 28, 2016 Report Posted April 28, 2016 Thank you so much for posting this tutorial. They are so cute 1
*Little-Girl* Posted May 27, 2016 Report Posted May 27, 2016 I'm not actually into pet play BUT I WANNA MAKE THESE SO BAD :ooo
Guest algernon Posted May 31, 2016 Report Posted May 31, 2016 Very good stuff. The world needs more cute DIY collars.
princess_april14 Posted June 2, 2016 Report Posted June 2, 2016 The pink one just so beautifuuuuuuuul * q *
Guest TwinklingSpace Posted June 9, 2016 Report Posted June 9, 2016 Oh wow! Those look so amazing. I'm not usually good at jewelry making. But I might need to try this! It looks so cute and adorable
IchigoHime Posted September 11, 2016 Report Posted September 11, 2016 I make collars similar to these. I love the ones you've done! So cute
Guest #°*Shy-chubby-bunny*°# Posted September 11, 2016 Report Posted September 11, 2016 (edited) These are so beautiful, thank you for sharing! Edited September 11, 2016 by #°*Shy-chubby-bunny*°#
Guest Juliette Posted September 11, 2016 Report Posted September 11, 2016 (edited) They are soon beautiful! I'm in love! And I've planned more with how i should make my own collars. So thank you so much for sharing! Edited September 11, 2016 by Juliette
Little_Ori Posted September 19, 2016 Report Posted September 19, 2016 I've been looking for something like this! I also love to wear something like that while in Little Space! I'll try making one and I'll post the pictures! Thaks for sharing!
CosmicKitty Posted September 19, 2016 Report Posted September 19, 2016 Ahh. I'm going to ask Daddy to help me make one ^^ thanks for sharing this! 1
MilkyUsagi Posted October 8, 2016 Report Posted October 8, 2016 OMG everything is so cute! you're so lucky finding such cute ribbons ;w; <3
pastelunicorn50 Posted October 19, 2016 Report Posted October 19, 2016 Oh my gosh, I've been waiting for a tutorial on this! Thank you ever so much! I can't wait to make my own. ^w^
Little_Smurf Posted October 24, 2016 Report Posted October 24, 2016 Thank you so much! I've seen a lot of collars on etsy where I was like 'oeh, oeh I want' but then it's kinda difficult to get them from USA based stores in Europe...plus now I can make different ones for different seasons..yay so happy!
Daddybears PLB Posted October 26, 2016 Report Posted October 26, 2016 Ooooh yey.... thanks yooo for the tutorial.... have been thinkin of trying to make one when I get time!!
Ricky Harleman, Posted September 21, 2022 Report Posted September 21, 2022 On 4/7/2016 at 9:55 PM, pyonchi said: !!! These collars are NOT meant for BDSM or any kind of play / rough scene ; they are simply day collars !!! !!! They are accessories: they can break very easily and won't make it through tugging in one piece !!! I recently got into crafting cute satin collars ! They're mostly used for kitten play, but I wear them in Little Space too~ they're just too adorable ! > v < I just thought I'd share the process with you all; if you can't understand a part in particular, don't hesitate to ask ! = v = ) / http://i.imgur.com/lwItHc2.pnghttp://i.imgur.com/gIFwqfQ.png I made a few collars and used different techniques for each of them: those instructions were followed while I made this collar ! (The pictures are a VERY big help, I'd strongly recommend looking at them if you get stuck ! Especially for the d-rings part ! )http://i.imgur.com/yywbmD5.png What I used : Satin ribbon (that large simple back ribbon) Grosgrain ribbon (the thinner ribbon with characters on it) 3x D-rings ("D" thick shaped rings, often used for BDSM products) Thread Measuring tape 3x Jumprings Regular needle Ambroidery Needle Hot glue (optional) Lace (optional) Charms, Bells, etc... (optional) x1 Cabochon to decorate the bow Steps (without pictures, sorry :c ) : Measure the diameter of your neck & remove 5 centimeters (so you can attach the D-rings and get a nice fit) ! Carefully cut your ribbons and lace following the previous measurements ! Get the thread and needle ready ; double your thread using this method (It'll make the collar steadier) ! For a pleated collar, use this method (you can do it without the rectangular thingy, but it might end up looking very messy) ! ♥ Don't forget to leave some ribbon space to fold back around the D-rings ! Leave two ~3CM long non-pleated areas at both end of your collar. Cut the sides of the areas so you can neatly fit a D-ring around them and fold both (grosgrain on top of the satin one, see steps #6 to #8) ribbons around it ! ♥ Use veeery thin, 2CM wide spreads of hot glue to glue your lace onto the satin ribbon (too much glue might make the collar uncomfortable to wear) ! Grab one end of your grosgrain ribbon, and lightly hot-glue it onto the end of your satin ribbon ! Lightly hot-glue the middle + other end of the grosgrain ribbon onto the satin one (again, it'll make the collar steadier) ! Double your thread if you need to, and start sewing both sides of your ribbon onto the large one. Have patience ! Take a piece of satin ribbon you haven't used yet, and cut it so it is 4CM long and large enough for you to fit a D-ring around ! Use this method to sew the ring onto the piece you've just cut (instead of one side of the ribbon being longer than the other, make them equal) ! After you've sewn the bottom of the ribbon around the D-ring, put a tiny bit of hot glue in between the two loose ribbon pieces ! Sew the top of the fabric holding the D-ring onto the middle of the collar (be sure to measure and stuff before) ! ♥ You can either order pre-made bows on eBay or Etsy, or make your own ; if you don't have any bows laying around, here's how I learned to make my own ! ♥ Glue your either pre-made or handmade bow onto the middle of your collar : be sure to hide the top of the D-ring holding ribbon ! Using this kind of blurry technique, get one of the ends of your collar (the flat part with trimmed sides) and insert a D-ring around it. Slide the D-ring further until it reaches the pleated (and larger, if you followed the steps right) area ! Fold the trimmed ribbon nicely around the ring. Hot-glue it onto the inner part of the collar, and finally, sew the sides of the ribbon if you're looking for a steadier result ! ♥ Make sure the D-ring doesn't touch the hot glue : the collar might not be as comfortable as it could be if the rings aren't able to rotate smoothly around the curves of your neck ! ♥ Connect three jump rings together, then connect an extremity to the D-ring under the bow (middle of the collar) ! Attach the bell / charm of your choice ! Be patient for this part, especially if you don't own any pliers (just like me n v n ~ ) ! Repeat as many times as you'd like, be creative and personalize it as you wish ! ♥ ♥ ♥ Cut a piece of the same satin ribbon you used before to tie the collar around your neck : make it pretty long ! Wear and love your very own kitten / little collar ! ♥ Skye_Severheart Here you go.
Guest Posted September 22, 2022 Report Posted September 22, 2022 ahhhh this is all sooo cute!! I want to do this!!
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now